20 / 38
Jan 2020

So I've been thinking about getting a light box because i still draw traditionally and it gets really messy. So messy sometimes I have a hard time re drawing it on my laptop. Does anybody here still use light boxes? Comment below :slight_smile:

Update** I bought the light box fellow artists! I'm excited I can't wait to try it out. Estimated time I receive it is tomorrow!

Update*** Got the box but am struggling still. Any tips or tricks is appreciated!

  • created

    Jan '20
  • last reply

    Jan '20
  • 37

    replies

  • 3.0k

    views

  • 15

    users

  • 37

    likes

  • 2

    links

Absolutely. I use an LED light pad from Huion to clean up traditional sketches before doing the inking digitally. It's a huge savior for my wrist especially.

I do! Not as much as I used to but if I go for anything traditional and have to ink, it's my go-to solution! I can highly suggest getting one for yourself, even if you don't use them much, they'll be there when you need it :wink:

Plus, nowadays there not even that expensive anymore if you look around a bit. :slight_smile:

Yeah theres a couple on Amazon that I'm looking at for below 24 dollars. It really is cheaper than how much they used to cost 10 or so years ago. I will for sure buy one!!!

Yup, I have the Huion LED light pad as well, and I use it on a regular basis. If I'm ever working in pencil or I want to ink traditionally without messing up my original, I'll bust out the light table. I love how slim it is, I can just pop it in my backpack with my sketchbook no problem.

I do too. It’s a customized drawing table that has a hole cut in the middle and is covered with plexiglass. The lights are LED lights installed underneath. I love that thing :slight_smile:
But nowadays you can get big LED lightboxes for little money. If I ever decide to seize down, I’d get one of those ^^

The ones that are portable are cheap on Amazon. For under 24 dollars its a great deal. Has 4 stars too

Meeeeeeee! :smiley: I absolutely recommend using them because it's so much nicer to digitally add lineart and colors when the sketch is clean and not a messy blur of lines. Just remember to take breaks to prevent the light from straining your eyes. It can be quite bright if you draw on cheap printer paper like moi.

Hahaha I draw on cheap printer paper too! Thanks for mentioning there can be glare and straining of the eyes.

I still use it :slight_smile: not for my webtoon, because I draw fully digital, but when I draw traditional I use it :slight_smile:

I did when I still did parts of the work traditionally but these days I do everything digital from start to finish

I honestly admire those who can do their art all digital esp when it comes to making comics. I'm waiting to get my light box so I can continue to make my comic. I just don't know how to map the comic out without drawing it traditionally first haha! Anywho just thinkng out loud.

Well, I draw on a cintiq so everything I do is drawn and mapped out the same way you would do with a light box. I just do it digitally instead. And I do my page thumbnails on paper so I can pin them and reference them while I'm drawing digitally. Before I got a cintiq I did it the same way as you before getting it in to ink but now I don't need to

I see! Fancy I forgot about cintiqs haha. That's cool you have one must make the process of making comics faster than just a regular tablet! Nice

Nah. Now I have more ability to put more work into it. You grow into your new environment lol Every time I improve or get faster I start doing more and other things that occupy the saved time

I did my first one-shot with mixed media- traditional line work + digital coloring. I ended up changing my work process a few times as I went along.

I started out just using regular pencil, inking over it, and erasing the pencil prior to scanning (like I had always done in the past).

Then I got fed up with the erasing step and changed over to sketching in non-photo blue pencil instead.

FInally I was getting tired of the details I was losing during inking due to not being able to see the sketch super well (those blue pencils are a tad light colored for me) so I changed over to sketching digitally, printing those out and using my light box to ink. That transition started right around these pages and continued all the way to the end:

posted this photo on instagram showing off the new process lol

and some others like this showing the printed sketches (2 letter size pages per comic page... RIP my printer ink)

I only ended up doing this because I was committed to seeing the comic through to the end with the trad. line work though. I'm going all digital for the next one :sweat_smile:

I didn't draw traditionally that much anymore, bit I have a light box and it is very convenient on having it at hand. I use it when I need to.

That's cool . I just wanted to let everyone know I bought the light box! It's coming through the mail estimated time is tomorrow! I'm excited :slight_smile:

Planning on getting me an LED lightbox; I wanna start back doing some traditional art stuffs- especially after I move & get my art station set up. I kinda feel like a lot of my first sets of prints looked a lot more solid in terms of composition & finish coz I had inked them traditionally...

@Rhonder I would blue line right on the bristol I was going to ink(I would blue line a rough finish from thumbnails that I would blow up via lightbox); when scanning(I'd scan in black & white), the blue lines wouldnt show in the digital file...I'd then set it up and color digitally.

Oh yeah, I might not have explained well, but that was how I was using them as well (kind of, I just went straight at it with the blue, without printing out my digital thumbnails). They disappeared with scanning as desired... but the blue was so light that I could barely make out some of the smaller details I had sketched just a day or two beforehand. I could see my graphite lines a lot more clearly but then there was the erasing hassle... so the final solution with printing out digital sketches to light box over ended up being a nice halfway compromise :raised_hands:

Is a light box the same as a light table? I'm confused. I do all of the drawings that make it into my comic with a light table. They're all drawn in ball point pen over a sketch on the light table, then scanned in and colored digitally. My light table is bright green, the best color.

I do use a light box since I draw may comics with pencil and then scan it so I can do the lineart and colors digitally.

I've used lightbox a couple of times with thick colored paper mostly and water markers. What I did was actually draw a rough sketch on my pc, print it on cheap thin paper and then transfer to thick paper with a lightbox. It was also a great way to practice with golden ink which was tricky for me due to its viscosity
Actually my sisters' boyfriend is shipping them worldwide and so I got mine as a present.



check out their instagram if you like

Hey fellow artists!!!!

So I just received my light box pad and wow! I am struggling to draw on the 2nd page on top of the rough sketch! It's hard to see my new lines maybe it's because the first page with the rough sketches should have been drawn with colored non photo pencil like blue or red or something.

What do you all think? This is my first time owning a light box so any help is appreciated! Thank you all :slight_smile:

try adjasting lighting in your room and your posture. it may be tricky to find the right angle and the amount of light you need around you to actually see the lines. As for me I've used basic office printer with black ink and it was ok to draw on top of this sketch with half of lights turned off

The darker the line, the easier it will be to see through to your other papers. I usually just stick with a normal pencil until the final stages. If your paper is quite a bit thicker (so if it's illustration board or watercolor paper) then it will be hard to see through, and for something really thick, I would do a different method to transfer the final image.

But if you mean like it's hard to tell the difference between your lines--then yeah I can get that. You sort of get used to it after a while, turning on and off the lightbox to get a sense of what your top image looks like.

That's exactly my problem about not seeing the difference in the lines when you draw. When I lift my 2nd paper I'm tracing on it looks worse than the first sketch because I picked the wrong lines I guess?

I think you're right I have to master how to do this and it takes time to get use to it..

Example original sketch

Now the 2nd paper I tried to trace the original

@CrystallikeICE there is a certain amount of "training" that goes with it(kind of like when you first go digital to train your eyes to follow the screen and trust your hands on the [non-screened] tablet)...you have to be able to discern which line is the one you want to do the final drawing off of and go from there. I usually did my stuff as really small thumbnails, blew the images up on a copier, and light boxed with non photo blue pencil onto bristol; I then inked over the blue lined bristol & scanned my work in.

Yeah, when doing traditional I usually do about 3 or 4 traces at least with the light box to really get the lines where I want em. So don't feel bad if it's not there right away, that's pretty normal.

Ohh so you do use blue non photo pencil too! Ive been thinking about buying a few to see if it makes a difference with the light box and transferring images. Can you elaborate on how you do the process If not that's fine too.

Ok. I will take your advice too. Kinda annoying to draw it over and over but the process would be the same on digital too.

@CrystallikeICE with me and the light box process, I kinda skimped or didnt do tight pencils, because I had refined my inking technique to the point where my inking process was tightening the lines and adding in embellishes. I learned early on in my comic drawing days that fully rendering a page of tight pencils & then coming back and inking said full pencils was too much time and energy- so I started putting the energy into making my inks the finished art and therefore I'd slack to some degree on pencil work...I'll still follow these guidelines when doing digital work as well.

But then again- I really like inking.

Soooo 2nd day of having a light box, you do have to get used to tracing your original sketches better. It did take me about 3-4 tries to get the trace I wanted! I also realized what helps is to tell myself the paper I'm transferring to is the final lines for coloring and going into the scanner.

I have to keep flipping the transfer page too to make sure it' the lines I want. If it's not then I just erase until I have the right lines transferred.

Thanks everyone for your advice on using a light box!

Sincerely,
CrystallikeIce